KernSafe Technology

I'm following your directions for a HA iSCSI SAN and I'm having the following problem:

When configuring iSCSI targets Cluster Node 1 and making sure "Enable Multi-Path" is selected I am seeing ALL the disk in Windows Computer Management Console (I currently have 4 targets on iStorage Server 1 & 4 targets on iStorage Server 2 with Failover iSCSI SAN Mode application on both of them & all the names are identical between the two iStorage servers (quorum/quorumpartner, csv1/csv1partner, etc). Instead of having 4 drives to Initialize I have 8 drives. What could I be doing wrong?


iSCSI Servers: ver2.60 on a Windows Server 2008 r2 Std. O/S
Cluster Node Servers: Windows 2008 r2 Datacenter

Please help!

Thank you.

Hi Madbenny,

Please refer to white paper: http://www.kernsafe.com/tech/iStorage-S ... r-2008.pdf
see pages 23-28, you need to install MPIO and enable it on iSCSI initiator.

Please let us know if you need additional help.

That worked. Thank you for your support, everything is working as should be with failover.