I have a Windows 2008 Server D: Drive that is 42TB, I am trying various iSCSI software to present it as a target.
I installed Kernsafe and setup the D: drive as a target.
I connect from a Windows Vista machine using Microsoft iSCSI initiator and the attached is what shows up in Disk Management.
Instead of showing up as a ~39000GB drive the iSCSI target shows up as 3 drives 100GB, 1900GB, 37000GB and the "New Simple Partition" option is not availalbe on the 37000GB partition in order to format/use it.
Does anyone have any insight on how I can get this started?
Thank you!
48 TB iSCSI Server
-
sixteamparlay
- Posts: 1
- Joined: Mon Nov 16, 2009 1:25 pm
48 TB iSCSI Server
- Attachments
-
- iscsi1.jpg (93.08 KiB) Viewed 7985 times
-
Olivia (staff)
- Posts: 205
- Joined: Thu Nov 05, 2009 5:52 pm
- Contact:
Re: 48 TB iSCSI Server
I know the problem, the large dynamic volume is not supported by the current version of iStorage Server, but we have resolved the problem.
I will post a beta version here when it is ready.
I will post a beta version here when it is ready.
KernSafe Support Team
iSCSI SAN, iSCSI Target, iSCSI initiator and related technological support.
[email protected]
iSCSI SAN, iSCSI Target, iSCSI initiator and related technological support.
[email protected]
Re: 48 TB iSCSI Server
This problem has been fixed in new version, please pay attention to http://kernsafe.com/forum/viewtopic.php?f=5&t=152