I just recently purchased iStorage Server and set it up on a pair of servers I followed the instructions for setting up High-Availability iSCSI SAN for VMWare ESX / ESXi Server and i have a VM setup and running from this, but the first of the two iStorage Servers has the cluster applications reporting a status "Failed" the status on the second servers is "Running"? How do I fix this?
Physically both server boxes are identical Dell's with 5x 1 Gb network ports teamed together on a private pair of 1Gb switches.
Failover Cluster status failed on one server
-
DragonLensman
- Posts: 1
- Joined: Wed Aug 24, 2011 2:33 pm
-
Olivia (staff)
- Posts: 205
- Joined: Thu Nov 05, 2009 5:52 pm
- Contact:
Re: Failover Cluster status failed on one server
Hello DragonLensman,
The "Failed" status indicate the channel from the server to it's partner server was broken by some reason, if the connection has no problem, it will recovery automatically when data synchronization needed.
By default, the new created Application is Failed status for a few seconds.
If the problem persist, please export and send log file to us: [email protected]
The "Failed" status indicate the channel from the server to it's partner server was broken by some reason, if the connection has no problem, it will recovery automatically when data synchronization needed.
By default, the new created Application is Failed status for a few seconds.
If the problem persist, please export and send log file to us: [email protected]
KernSafe Support Team
iSCSI SAN, iSCSI Target, iSCSI initiator and related technological support.
[email protected]
iSCSI SAN, iSCSI Target, iSCSI initiator and related technological support.
[email protected]